If you’ve just finished a home improvement project and topped it all off with a fresh coat of paint, or if you’re a painting contractor about to call your latest client’s home a job well done, you should use a paint thickness gauge. This handy tool will allow you to determine if the paint job you just finished fits the bill and meets the standards of good paint job. Of course, there are a few things you should know before you go on to measure your paint job to ensure accurate results. Find out how to properly use a paint thickness gauge by reading through these tips and tricks. Buy dewpoint meters now!
1. Calibrate Your Gauge – There are lots of different kinds of materials that you might paint on, and these differences can affect the results rendered by your paint thickness gauge. For example, a gauge might read differently on steel and high carbon steel despite the same paint thickness. That said, it’s important that you make sure your paint thickness gauge is well and appropriately calibrated before you put it to use. Read the manual and learn the specifics to find out which settings you should use.
2. Inspect the Paint – Before you place your paint thickness gauge on the surface to be measured, make sure the paint has completely dried. If the paint is still wet, or if you sense that some inner layers may still be moist, postpone the measurement to a different time. The last thing you want is to damage your paint job just because you wanted to find out how thick it was. If you’re using a wet paint thickness gauge, read the instructions and find out how to use the tool without damaging the wet paint surface. For dry paint gauges, complete dryness is required for accurate readings. Get coating thickness gauge now!
3. Proper Handling – It’s possible to get a wrong reading if you don’t handle and use the tool correctly. For instance, if the part of the paint thickness gauge that’s supposed to make contact with the surface doesn’t fully press onto the material, it may not be able to get an accurate reading. When you use your paint thickness gauge, be sure to press firmly against the surface and have as much of the reader’s surface area in contact with the material. Wait for the numbers to settle before you move the gauge to ensure the most accurate reading.